Inspired by Versatility
Kaycan D5 Vertical Siding brings authentic vertical character to any home with its distinctive double-5" panel design. Two 5" boards separated by a raised centre batten deliver bold vertical shadow lines and a full 1/2" profile depth that adds genuine dimension to the wall surface. The realistic woodgrain texture and low gloss finish create the look of freshly painted wood, blending seamlessly with traditional siding materials. Heavy gauge premium thickness and Duratron™ Vinyl Technology ensure lasting impact resistance and colour retention through decades of Canadian weather. With 12 colours and high 200 sq.ft. carton coverage, D5 Vertical works beautifully for entryways, porches, or as solid panel soffit.
White
D5 Vertical Colours
D5 Vertical Colours(12)
Colours shown are approximate representations only and may appear differently on screen than the actual product. Request a physical sample before making your final decision.
Double-5" vertical panel featuring two 5" boards separated by a raised centre batten — delivers a realistic woodgrain look with bold vertical shadow lines and a full 1/2" profile depth
| Length | 10' (3.05 m) |
| Panels/Box | 24 panels/carton |
| Coverage | 200 sq. ft. (18.58 m²) per carton |
| Profile Depth | 1/2" full |
| Exposure | 10" total (two 5" sections with raised centre batten) |
| Finish | Low gloss woodgrain |
| Gauge | Heavy gauge premium thickness |
Install only on a smooth, flat surface — do NOT install over strapping; use underlayment to achieve a flat surface if needed
Work from starter trim upward; lock each panel and fasten every 12" vertically
Place the first fastener in the uppermost end of the top nail slots to hold the panel in position
Place all other fasteners in the center of the nail slots; fasten every 12"
Allow 3/8" clearance above all horizontal joints — including at windows, doors, and other obstacles
Allow 1/4" clearance below horizontal joints
Leave 1/32" to 1/16" clearance between nail head and siding panel — panels must float freely to expand and contract
Never face-nail siding — fasten through the nailing hem only
Apply drip cap above all windows and doors before installing siding over them
Check every fifth or sixth panel course for vertical alignment
Installation instructions must be followed — any deviation will render the warranty null and void
Always refer to the complete Kaycan Vinyl Siding Installation Guide before starting
Check all local building codes and fire regulations before installation; local code requirements always take precedence
General Tools
Specialty Tools
| Accessory | Purpose | Where to use |
|---|---|---|
| 5/8" J Trim (1035)5/8" deep channel; allow 3/8" clearance above horizontal joints and 1/4" below per Technical Bulletin; 1-7/16" face height, 1-1/4" base, 1" depth | Frames all wall penetrations and terminates siding at top of wall under soffit | Around door and window openings (sides, top, bottom); under soffits at top of wall |
| 3" Outside Corner (1105)3" wide face — sized for the D5 Vertical panel; 3/4" channel depth | Finished outside corners where two vertical-sided walls meet at an exterior angle | Plumb at outside corners; vertical panels slide into the 3/4" channels on each face |
Formula
Siding required = [Wall area (Step 1) + Gable/dormer area (Step 2) − Openings area (Step 3)] + 10% waste
1 square = 100 sq.ft. (standard industry unit); D5 Vertical carton covers 2 squares (200 sq.ft.)
Step 1 — Sketch all four sides of the home; for each wall multiply height × width to get surface area in sq.ft.
Step 2 — Measure gables and dormers: for each triangle measure straight up from the base to the top, then multiply base × height × 0.5; add all gable/dormer areas together
Step 3 — Measure all openings NOT to be covered (windows, doors, chimneys) and multiply height × width for each; add together
Step 4 — Add Step 1 + Step 2, subtract Step 3, then add 10% for cutting waste: Siding required = [Step 1 + Step 2 − Step 3] + 10%
Step 5 — Divide total sq.ft. by 200 to determine the number of cartons needed (1 carton = 200 sq.ft.); round up to next whole carton
Step 6 — Measure under eaves: multiply the length by the width of each overhang and add together (for soffit calculation)
Step 7 — Determine soffit squares: divide soffit total from Step 6 by 100
Step 8 — Measure linear feet of each accessory (J-trim, corner posts)
Step 9 — Order accessories: J-trim by linear feet (12' lengths); corners by linear feet (10' lengths)
All colours available in low gloss woodgrain finish only
Submit your spec list and we'll respond with pricing and availability - usually within one business day. Available in 12 colours for your project.
Get a wholesale quote
Tell us the product, colour, and quantity - we'll handle the rest.
