Mitten›Tytan by Selena

Tytan Insulating Foam

Name: Exterior Pro Materials
Address: Unit 5, 1235 Journey's End Cir, Newmarket, ON, L3Y 8T7, CA
Telephone: +1 (905) 836-7272

Tytan Insulating Foam is a professional polyurethane aerosol foam sealant for sealing and insulating gaps around windows, doors, pipes, and duct penetrations. Available in Gun PU (low-expansion, no-bow formula for precise frame installation) and Straw PU (high-expansion for large cavities) variants, in 9 oz and 17 oz cans. Compatible with the Gun Pro and Eco Gun Pro reusable applicator guns.

Request a Quote Datasheet

WarrantyProduct replacement only — Selena USA, Inc.

Profiles & Specifications

TYTAN-GUNGun PU Foam — Window & Door Foam Sealant Pro

Professional low-pressure, low-expansion polyurethane foam for filling, sealing, and insulating gaps between window and door frames and their rough openings. The controlled low-expansion formula fills without bowing or bending frames. Applied with a reusable foam gun (sold separately) for precise metering. Bonds to wood, concrete, plaster, metal, masonry, glass, and most plastics. Available in 9 oz (255 g) and 17 oz (480 g) cans.

Application	Gun-applied (pistol-grip foam gun required)
Expansion	Low-pressure, low-expansion — will not bow frames
Can Sizes	9 oz (255 g) · 17 oz (480 g)
Yield — 17 oz	25–30 L expanded · ½" gap: 196 m · ¼" gap: 787 m
Yield — 9 oz	12–17 L expanded · ½" gap: 94 m · ¼" gap: 378 m
Application Temp	See label; store below 50°C (122°F)
Cured Colour	Pale yellow
Best For	Window and door rough openings — interior and exterior

TYTAN-STRAWStraw PU Foam — Window & Door Foam Sealant

High-expansion polyurethane foam for quickly filling large gaps and openings inside and outside buildings. The disposable straw applicator makes it economical for one-time or occasional use. Bonds to wood, concrete, plaster, plumbing materials, and most common construction substrates. Available in 9 oz (255 g) and 17 oz (480 g) cans.

Application	Straw-applied (disposable straw included)
Expansion	High-expansion — efficient for large cavities
Can Sizes	9 oz (255 g) · 17 oz (480 g)
Yield — 17 oz	21–26 L expanded · ½" gap: 165 m · ¼" gap: 660 m
Yield — 9 oz	11–16 L expanded · ½" gap: 87 m · ¼" gap: 348 m
Cured Colour	Pale yellow
Best For	Large gaps, corner T-joints, pipe/duct penetrations, siding edges

Specifications

Gun PU Foam — Yield by Can Size and Gap Width

Can Size	Expanded Volume	½" Gap	⅜" Gap	¼" Gap
17 oz (480 g)	25–30 L (0.88–1.06 cu ft)	646 ft / 196 m	1,149 ft / 350 m
9 oz (255 g)	12–17 L (0.42–0.60 cu ft)	311 ft / 94 m	553 ft / 168 m

¼" gap yields: 17 oz → 2,585 ft (787 m); 9 oz → 1,243 ft (378 m).

Straw PU Foam — Yield by Can Size and Gap Width

Can Size	Expanded Volume	½" Gap	⅜" Gap	¼" Gap
17 oz (480 g)	21–26 L (0.74–0.92 cu ft)	544 ft / 165 m	967 ft / 294 m
9 oz (255 g)	11–16 L (0.39–0.57 cu ft)	286 ft / 87 m	508 ft / 154 m

¼" gap yields: 17 oz → 2,176 ft (660 m); 9 oz → 1,144 ft (348 m).

Physical & Chemical Properties

Property	Value
Physical state	Aerosol foam — liquid dispensed by gaseous propellant
Cured colour	Pale yellow
Flash point	< 0°C (32°F) — flammable aerosol
Relative density	1.01 (water = 1)
Flammability limits	1.8% lower (LFL) · 8.4% upper (UFL)
Solubility	Insoluble in water; reacts with water
Storage temp	Do not expose to temperatures exceeding 50°C (122°F)
Transport	UN1950 — AEROSOLS, Class 2.1 (DOT / TDG Canada)

Order quantities and lead times may vary. Contact us for availability.

Certifications & Testing Standards

Tytan Insulating Foam meets or exceeds the following Canadian and international performance standards.

Test / Property	Standard	Result / Value
WHMIS Classification: Class A (Compressed Gas) · Class B5 (Flammable Aerosols) · Class D2A (Respiratory sensitization, Reproductive toxicity) · Class D2B (Skin sensitization, Eye irritant)	-	Certified
Transport: UN1950, Aerosols, Class 2.1 — DOT (US) and TDG (Canada)	-	Certified
US TSCA and Canada DSL/CEPA 1999 compliant	-	Certified
GHS Signal Word: DANGER — Flammable aerosol; contains gas under pressure; may cause allergy or asthma symptoms if inhaled	-	Certified
Manufactured by Selena USA, Inc., Holland MI — distributed in Canada through Mitten Inc.	-	Certified
Warranty: Selena USA, Inc. liability is limited to replacement of product only	-	Certified

Compatible Accessories

Application Guide

PREPARATION — Ensure surfaces are clean and dry. Wear protective eyewear and gloves. Do not breathe vapors or spray. Work in a well-ventilated area. Keep away from heat, open flames, sparks, and hot surfaces. Do not smoke.
APPLICATION — Fill cavities to approximately 50% full to allow for foam expansion after application. Cracks or gaps wider than 2" should be filled gradually in multiple layers.
GUN FOAM — Attach the foam gun (Gun Pro or Eco Gun Pro) to the Gun PU Foam can. Hold the can inverted. Apply foam by squeezing the trigger, moving steadily along the gap. Adjust the flow valve to control output.
STRAW FOAM — Attach the included straw to the nozzle. Hold the can inverted. Apply foam by pressing the nozzle, moving steadily along the gap.
CURING — Allow foam to fully cure before trimming. Curing time varies with temperature and humidity.
TRIMMING — Trim excess foam with a sharp knife or serrated edge. Cured foam may be sanded, painted, or stained — not sooner than 24 hours after application.
UV PROTECTION — Cured foam will discolour and lose its stability and properties when exposed to UV light. Paint or coat exposed foam for best results.
STORAGE — Store in a cool, dry location below 50°C (122°F). Do not puncture or expose to direct sunlight for extended periods. Keep out of reach of children.

Ready to order Tytan Insulating Foam?

Submit your spec list and we'll respond with pricing and availability - usually within one business day.

Get a wholesale quote

Tell us the product, colour, and quantity - we'll handle the rest.

Request a Quote

or call us at+1 (905) 836-7272