Siding Supplier for Toronto
Vinyl siding, aluminum soffit and fascia, steel and aluminum cladding, stone veneer and trim for Toronto re-sides, additions and light commercial work.
About 50 km from Toronto
Highway 404 to the Don Valley Parkway
Pickup Mon to Sat
Mon to Fri 7:30 AM to 5:00 PM, Sat 8:00 AM to 4:00 PM
Delivery quoted with your order
Priced for the address and order size
Authorized Mitten & Kaycan distributor
Full colour ranges, not leftovers
Exterior materials for Toronto contractors and homeowners
Toronto work is different from suburban work: narrow lots, brick semis with a single sided gable or dormer, third-storey additions, and laneway houses that get clad in steel or board-and-batten. Those jobs are measured in squares, not pallets, and they need a supplier who will sell a short order without a fuss and stock the black, charcoal and white finishes that Toronto designs call for.
The warehouse is 50 km up the 404, which most Toronto crews treat as a morning run rather than a delivery problem. The counter is open six days. If the load is too big for that, say where it is going on the quote request and the delivery cost comes back with the price. Commercial and mixed-use work pulls from MAC Metal architectural steel panels, aluminum cladding and the Kaycan aluminum trim systems.
Areas we serve in and around Toronto
- North York
- Scarborough
- Etobicoke
- East York
- Leaside
- Willowdale
- Don Mills
- The Danforth
- Leslieville
- The Beaches
- Bloor West Village
- The Junction
- Agincourt
What we stock for Toronto projects
Everything ships from the Newmarket warehouse. Brands: Mitten, Kaycan, CertainTeed, Novik, Foundry, GenStone and MAC Metal. James Hardie fibre cement is in stock but not yet listed online; ask for it by name.
- Vinyl sidingMitten and Kaycan horizontal and vertical profiles, including board-and-batten
- Steel and metal panel sidingMAC Metal architectural panels for additions, laneway houses and commercial elevations
- Aluminum siding and claddingAluminum siding and cladding for low-maintenance commercial and multi-unit work
- Soffit and fasciaAluminum soffit and fascia in black, white and the full colour range
- Aluminum trim coilAluminum trim coil for site-bent flashings and capping
- Stone veneerGenStone and Novik veneer for porch piers and front elevations
Toronto siding questions
- Do you deliver siding to Toronto?
- We do, but the cost depends on where in the city it is going and how much of it there is, so it gets priced with the quote rather than published as a flat rate. Plenty of Toronto crews just drive up instead; the warehouse is about 50 km north on the 404 and the counter is open Monday to Saturday.
- Will you sell a small order for a single gable or a dormer?
- There is no minimum pallet. We sell by the carton and by the piece, which is the only way a single gable or a dormer works as an order. Give us the wall area and the quote comes back with the siding, J-trim, corners and starter counted out.
- Do you supply siding for commercial buildings in Toronto?
- That is what the MAC Metal architectural steel line, the aluminum cladding and the Kaycan aluminum trim systems are for. All three are stocked and all three turn up on commercial, mixed-use and multi-unit work. Send drawings or elevations with the quote request and we will price the panel and the trim together.
- Can you install as well as supply in Toronto?
- We sell the material; we do not swing a hammer. Sherak Ltd. is the installer we work with, and they cover Toronto and the wider GTA. Say so on the quote request and we will hand your details across.
- Which brands of vinyl siding do you carry?
- We are an authorized distributor for Mitten and Kaycan, and also carry CertainTeed, Novik, Foundry, GenStone and MAC Metal. James Hardie fibre cement is in stock but not yet listed online; ask for it by name.
Pricing a Toronto job?
Send the wall areas, colours and address. We quote the materials and the delivery together.