Gutter Clean Pro is Alu-Rex's dual-layer gutter guard for gutters that are already on the house. Two sheets of black aluminum, 7/64 in. micro-perforations over offset slots, keep out pine needles and fine debris while draining 40.6 in. of water per hour per linear foot on a 5 in. gutter. It fits any bracket type and carries lifetime clog-free and manufacturing warranties, coniferous areas included.
Gutter Clean Pro is the answer when the gutters are sound but the trees are not going anywhere. It is Alu-Rex's dual-layer guard in a retrofit form: it goes on top of the gutters that are already on the house, whatever they are hung with, and it keeps out pine needles as well as leaves. Nothing has to come down, and the gutter itself is not replaced.
The guard is two sheets of aluminum under a Carbon Black finish on top. The top one has 7/64 inch micro-perforations and the one below has long slots, set out of line so fine debris has no straight path in, which Alu-Rex calls Eclipse. The suction between the sheets (Vortex) pulls water through fast enough to drain 40.6 inches per hour per linear foot on a 5 inch gutter and 49.2 inches on a 6 inch gutter. The front locks onto the gutter's front lip, which also stiffens the lip against snow sliding off the roof. The raised Roll-Back+ curve turns overflow back into the gutter in a downpour. At the back, a flexible vinyl strip, Flex-Seal, closes the gap against the fascia and is made to resist UV, mould and temperature swings. Peel-away QuickStrip sections let the installer trim that seal to fit an uneven roofline.
Gutter Clean Pro carries Alu-Rex's lifetime clog-free warranty, written to include coniferous areas, and a lifetime manufacturing warranty. There is no sturdiness term, because it is a guard rather than a hanger. For new gutters, the same protection comes built into a hanger as DoublePro.
